Home Hardware › m8 x 10 x 30mm

M8-1.25 x 30mm Hex Head Cap Screws Steel Metric Class 10.9 Plain Finish (Quantity: 100 pcs) - Coarse Thread Metric Fully Threaded Length: 30mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

M8-1.0 x 30mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 50 pcs) - Fine Thread Metric Partially Threaded Length: 30mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

Set Screws Cup Point - Knurled M8-1.25 x 30mm Alloy Steel Hex Socket (Quantity: 10) Coarse Thread M8 Grub/Blind/Allen/Headless Screw Length: 30mm

Knurled cup point Set Screws have an externally knurled cup point that locks the set screw in place and resists loosening and deformation under high vibration. Knurled cup point set screws are used both in poorly tapped holes and to locate gears and... more

M8-1.25 x 30mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Plating (Quantity: 1150 pcs) - Coarse Thread Metric Fully Threaded 30mm Metric Thread M8 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

M8-1.0 x 30mm Hex Head Cap Screws Steel Metric Class 8.8 Plain Finish (Quantity: 1200 pcs) - Fine Thread Metric Partially Threaded 30mm Metric Thread M8 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M8-1.25 x 30mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Plating (Quantity: 100 pcs) - Coarse Thread Metric Fully Threaded 30mm Metric Thread M8 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

M8-1.25 x 30mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Yellow Plating (Quantity: 1150 pcs) - Coarse Thread Metric Fully Threaded Length: 30mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

FOLIV 205PCS M6-1.0 M8-1.25 Flanged Hex Bolts Class 10.9 Alloy Steel Black Zinc Plated Metric Flanged Hex Screws M6 x 12/16/20/25/30mm and M8 x 16/20/25/30/40mm

FOLIV 205PCS M6-1.0 M8-1.25 Flanged Hex Bolts Class 10.9 Alloy Steel Black Zinc Plated Metric Flanged Hex Screws M6 x 12/16/20/25/30mm and M8 x 16/20/25/30/40mm more

M8 Aluminum Spacers 10 Pcs Metal Spacer Aluminum 8.2mm ID x 12mm OD x 30mm L for 5/16 or M8 Screw Bolts

This Aluminum spacer can be widely used in various production-oriented field such as house decoration floor construction construction engineering electronic device manufacturing etc Advantage Made of durable Aluminum material which is hard good... more

260pcs Hex Cap Flange Bolt Assortment Kit/Screws Nuts & Washers/Black Oxide M6-1.0 X 16/20/25/30/35mm M8-1.25 X 16/20/25/30mm

Flanged Right Hand VKKM HEXAGON Carbon Steel Carbon Steel LB69873 undefined more

M8-1.25 x 30mm Hex Cap Screws Metric Class 10.9 Plain Plated Steel (Quantity: 1150) Coarse Thread (UNC) Fully Threaded

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

Uxcell Ball Point Set Screws M8 x 30mm High Carbon Steel Metric Spring Hex Socket Grub Screw 10 Pack

Uxcell Ball Point Set Screws M8 x 30mm High Carbon Steel Metric Spring Hex Socket Grub Screw 10 Pack Made of high carbon steel with high strength high hardness and wear resistance. Hexagon socket drive uniform force good locking effect not easy to... more

Dorman 980-430D Flanged Bolt - Class 10.9 - M8-1.25 X 30mm (Pack of 4)

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity. With over 80 000 products backed by a team of product engineers and experts based in the United States Dorman is the first choice of... more

Set Screws Cup Point - Knurled M8-1.25 x 30mm Alloy Steel Hex Socket (Quantity: 10)

Socket Set Screws Cup Point ISO Metric Thread Manufactured to ISO 4029 dimensions Hardness: Rockwell C45-53 more

Forgefix - High Tensile Bolt 8.8 Grade Steel ZP M8 x 30mm Bag 10

These Forgefix High Tensile Hex Head Bolts are made from 8.8 grade steel. The bolts are part threaded and conform to DIN 933 standards. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these... more

M8-1.0 x 30mm Hex Cap Screws Metric Class 8.8 Zinc Plated Steel (Quantity: 100) Fine Thread (UNF) Fully Threaded

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M8 x 30mm Female Threaded Expansion Bolt Sleeve Anchors Tool 10 Pcs

Made of metal material in silver tone color features: 8mm female thread expanding bolt design. When installing the slotted metal cone expand the sleeve to fill all the pores and crevices of the material in which it is set. more

Socket Set Screws Full Dog Point M8-1.25 x 30mm (Quantity: 10) Alloy Steel Metric Class 14.9-45H Thermal Black Oxide Hex Socket Drive

DIN 915 Full Dog Point 45H Socket Set Screw more

VIGRUE M8-1.25 x 16/20/25/30mm Flange Hex Head Bolts Nuts Washers 125PCS Class 10.9 Alloy Steel Black Zinc Plated Hex Flange Screws Assortment Kit Full Coarse Thread

Material: 10.9 Grade Alloy Steel Finish: Black Zinc Plated Rust Resistance: Black Zinc Plated>Black Phosphate>Black Oxide M6*12 10 M6*16 10 M6*20 10 M6*25 8 M6*30 8 M6*35 6 M6*40 6 M6 nut 61 M6 gasket 61 M5 wrench 1 more

Socket Set Screws Metric M8-1.25 X 30MM Black Oxide Coated Steel 10-Pack

Socket set cap screws have cup points that produce a thin edge that digs into hard surfaces for a secure hold. This fastener is headless and contains an internal hex drive. Use an Allen wrench (hex key) to secure with required torque as needed.... more

Socket Low Head Cap Screw DIN 912 M8-1.25 x 30mm Alloy Steel Metric Class 10.9 (SIP 147) Black Oxide Hex Socket (Quantity: 100)

Thread: Coarse / Full Thread / Metric Class 10.9 (SIP 147) / Black Oxide Recommended Hex Socket Allen Key Wrench: 5 more

(25) M8 - 1.25 x 30mm JIS Hex Head Flange Bolt - Small Head Class 10.9 Zinc

JIS Hex Head Flange Bolt Diameter: 8mm Thread Pitch: 1.25 Length: 30mm Head Height: 8mm Wrench Size: 12mm Flange O.D.: 17.5mm Class 10.9 Zinc JIS B 1189 Thread Length: Full Thread 25 Per Package more

Socket Flat Countersunk Head Cap Screw M8-1.25 x 30mm Alloy Steel Metric Class 10.9 Black Oxide Hex Socket (Quantity: 100)

Coarse Thread Full ThreadSteel-Metric Class 10.9 Black Oxide Recommended Hex Socket Allen Key Wrench: 5 (Metric) Recommended Hex Socket (Allen Wrench) Size: 5 (Metric) more

Socket Flat Countersunk Head Cap Screw M8-1.25 x 30mm Alloy Steel Metric Class 10.9 Black Oxide Hex Socket (Quantity: 2000)

Coarse Thread Full ThreadSteel-Metric Class 10.9 Black Oxide Recommended Hex Socket Allen Key Wrench: 5 (Metric) Recommended Hex Socket (Allen Wrench) Size: 5 (Metric) more

Uxcell M8 x 30mm 304 Stainless Steel Fully Threaded Rod Right Hand Threads 10 Pack

Uxcell M8 x 30mm 304 Stainless Steel Fully Threaded Rod Right Hand Threads 10 Pack 304 stainless steel which provides great corrosion resistance and antirust ability for long service life. Fully threaded rods are widely applied on many occasions. Used... more

Socket Low Head Cap Screw DIN 912 M8-1.25 x 30mm Alloy Steel Metric Class 10.9 (SIP 147) Black Oxide Hex Socket (Quantity: 700)

Thread: Coarse / Full Thread / Metric Class 10.9 (SIP 147) / Black Oxide Recommended Hex Socket Allen Key Wrench: 5 more

Uxcell M8 x 30mm 304 Stainless Steel Hex Lag Screws for Wood 10 Pack

Uxcell M8 x 30mm 304 Stainless Steel Half Thread Self-Tapping Bolts Hex Lag Screws for Wood Screw 10 Pack Lag screws or coach screws are large wood screws. The head is typically an external hex. with the coarse threads of a wood-screw or... more

Socket Head Shoulder Screw M8 x 30mm Alloy Steel Black Oxide Hex Socket Drive (Quantity: 25)

Manufactured to: ISO 7380 Specifications and Standards Shoulder Diameter: M8 x Shoulder Length: 30mm Thread Size: M6-1.0 Nominal Hexagon Socket (allen wrench) size: 4 (Metric) more

AMZ Clips And Fasteners 15 M8-1.25 X 30mm J.I.S. Small Head Hex Flange Bolts

Small Head Hex Flange Bolts Zinc Plated J.I.S. B1189 I.S.O. Class 10.9 Size: M8-1.25 x 30mm Hex Size: 12mm Flange O.D.: 17.5mm 15 Per Package more

Socket Head Shoulder Screw M8 x 30mm Alloy Steel Black Oxide Hex Socket Drive (Quantity: 100)

Manufactured to: ISO 7380 Specifications and Standards Shoulder Diameter: M8 x Shoulder Length: 30mm Thread Size: M6-1.0 Nominal Hexagon Socket (allen wrench) size: 4 (Metric) more

Unique Bargains M8 x 30mm Metric Hex Socket Countersunk Flat Head Screw Bolts Black 20PCS

10.9 Alloy Steel Material 1.25mm Thread Pitch Hex Key Hex Socket Countersunk Flat Head Key Bolts Screws M8 x 30mm. Countersunk bolts is anti-corrosion rustless non-pollution and high-hardness. It is widely used in industrial. more

M8 Thread 30mm 304 Stainless Steel Hex Head Screws Bolt 10pcs

Product Name: Hex Head Bolts Material: 304 Stainless Steel Dimension: M8 x 30mm Rod Length: 30mm /1.18 Pitch: 1.25mm / 0.05 Hex Width: 13mm / 0.51 Hex Thickness:5.45mm / 0.21 Package Content: 10 x Hex Head Bolts Description: 1. Designed with reverse... more

AMZ Clips And Fasteners 10 8-1.25 X 30mm DIN 933 Cap Screws Class 8.8 Zinc

M8 - 1.25 x30mm DIN 933 Metric 13mm Hex Head Cap Screws Zinc Plated Fully Threaded Regular Pitch - Grade 8.8 Heat Treated Alloy Steel Tensile Strength: 116 000 PSI 10 Per Package more

60 M6 Socket Head Cap Screws 304 Ss Bolt And Nut Set 6Mm X 10/12/16/20/25 / 30Mm

Product Description Package contents: 60 M6 hexagon socket bolts 1.M3 M6 M8 hexagon head screws with matching nuts meet your different requirements the need of home life. 2.Made of 304 stainless steel flame retardant. Ideal for high stress applications... more

100pc M8 8mm Bolts Bolt with Nuts Assortment 30 - 100mm Hex Head

Fully threaded M8 bolts. 50 x M8 Nuts. 14mm hex size. 1.25mm Pitch All contained in a storage container for easy storage and transportation. Set includes: 15 x 8mm x 30mm 15 x 8mm x 50mm 10 x 8mm x 75mm 10 x 8mm x 100mm 50 x 8mm Nuts more

Socket Set Screw Flat Point DIN 913 M8-1.25 X 30Mm Alloy Steel Metric Class 14.9-45H Black Oxide Hex Socket (Quantity: 100) Coarse Thread Diamater: M8 X Length: 30Mm

Thread:Coarse / Thread / Metric Class 14.9 - 45H / Black Oxide Recommended Hex Socket Allen Key Wrench:4 (Metric) Thread Diameter-Pitch:M8-1.25 Length:30mm Recommended Hex Socket (Allen Wrench) Size:4 (Metric) Black Oxide is not a protective finish and... more

Set Screw Flat Point DIN 913 M8-1.25 X 30Mm Alloy Steel Metric Class 14.9-45H Black Oxide Hex (Quantity: 100) Coarse Thread Diamater: M8 X Length: 30Mm

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. Thread:Coarse / Thread / Metric Class 14.9 - 45H / Black Oxide Recommended Hex Socket Allen Key Wrench:4 (Metric)... more

M8-1.25 x 30mm Hex Head Cap Screws Stainless Steel A2 Plain Finish (Quantity: 100 pcs) - Coarse Thread Metric Fully Threaded 30mm Metric Thread M8 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from stainless steel. Threaded shank does not extend completely to the head. more