You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Seller
By Material
By Home Hardware Types
By Home Hardware Features
By Keyword
Best Seller | This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... more | go to store |
This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by a variety of manufacturers of vinyl patio doors. The housing is 3/4 in. wide and 1 in. tall... more | go to store |
This is a diecast unique back patio door roller assembly with a 1-1/4 in. concave steel ball-bearing roller used by a variety of patio door manufacturers. Its diecast housing is a cross between the Unique or the Plain Back styles. It is 11/16 in. wide... more | go to store |
Has you screen door latch been damaged, broken or is it just missing? This sliding screen door keeper or strike is often used by Columbia and Trimview screen doors as well as a variety of other screen door manufacturers. It is 1/2 inch wide with a 9/16... more | go to store |
This is a B-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/16 in. tall with a flare width of 13/16 in.. The B- tab secures the assembly as the mounting screw is driven up through the B-tab hole and into the... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare, and is 1-9/16 in. tall. It features a rear adjusting screw with a 1/4-20... more | go to store |
This is a K-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... more | go to store |
This heavy gauge steel constructed strike comes plated in brass. It replaces most deadbolt strikes for increased security, a result of securing 3 in. screws to wall stud. The plate measures 1-1/4 in. wide by 3-5/8 in. long and is used with most entry... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 19/32 in. wide with a 23/32 in. flare and 1-3/16 in. tall. It is rear adjusting with a 3/16 in. diameter mounting... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The housing is 9/16 in. wide and 1-3/8 in.... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This is a white flush mounted handle and latch set used by a wide variety of sliding screen door manufacturers. It has a steel hook latch with 1 inch... more | go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... more | go to store |
This is an adjustable diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used primarily by Canadian Patio Door Manufacturers. It's plain back diecast housing is 1/2 in. wide, 1 in. tall and 1-9/16 in. long.... more | go to store |
This is a stainless steel tandem C-tab roller assembly with 1-1/2 in. stainless ball bearing rollers. The adjustable stamped stainless steel housing is 11/16 in. wide with a flare width of 13/16 in. 1-1/16 in. tall, and 3-1/8 in. long. The C-tab fits... more | FREE shipping go to store |
0.020 Gauge roll-formed aluminum screen frames with 0.165 wide channels. Use spline size 0.165 for aluminum mesh or 0.185 for fiberglass mesh. Finish: Bronze | Prime-Line Screen Frame, 3/4 In. x 7/16 In. x 94 In, 0.02 Gauge, Fiberglass in Brown | 94 H... more | go to store |
0.020 Gauge roll-formed aluminum screen frames with 0.165 wide channels. Use spline size 0.165 for aluminum mesh or 0.185 for fiberglass mesh. Finish: Silver | Prime-Line Screen Frame, 3/4 In. x 7/16 In. x 94 In, 0.02 Gauge, Fiberglass in Gray | 94 H x... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... more | go to store |
0.020 Gauge roll-formed aluminum screen frames with 0.165 wide channels. Use spline size 0.165 for aluminum mesh or 0.185 for fiberglass mesh. Finish: Silver | Prime-Line Screen Frame, 3/4 In. x 7/16 In. x 94 In, 0.02 Gauge, Fiberglass in Gray | 94 H x... more | go to store |
This is a unique back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The housing is 13/16 in. wide with a 1-1/8 in. flare, 1-15/32 in. tall and 4-1/2 in. long. It has two machine threaded mounting screw holes... more | go to store |
This outswing keeper is used with slide latch. Fits on a square edge 3/4 in. post. It is constructed of satin cast stainless steel, The strike keeper measures 2-1/2 in. x 1-7/16 in. x 1-7/8 in.. The mounting holes are at 1-1/2 in. on center. |... more | go to store |
These are rectangular pilaster shoes with closed, square ends, they fit 3/4-inch thick posts, and they feature a 4-inch tall reach. Pilaster shoes like these are used with commercial restroom partition posts for new construction and replacement... more | go to store |
Ads related to three posts fritsche 44 wide