You're in Power Tools
See Matches in:
Narrow Search Results
| Best Seller  | Crown Alloy .035 x 8" ER 347 Stainless Steel MIG 10 lb SPOOL Used to weld type 347/321 wrought alloys and CF-8C cast alloys. Also used to weld 304-308 type alloys when intergranular corrosion is a problem. Tensile strength 96,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click... more | go to store |
 | Crown Alloy .035 x 8" DEO-COPPER Deoxidized Copper MIG 10 lb SPOOL Crown Deoxidized Copper is used for welding copper where good electrical conductivity is necessary such as buss bars, lugs, etc. It can also be used to join galvanized steel and deoxidized copper to mild steel where strength is not important. Can be... more | go to store |
| Best Seller  | Crown Alloy .035 x 8" ER 100S-1 High-Strength Steel MIG 11 lb SPOOL Crown ER 100S-1 will deposit high-strength, very tough weld metal for critical applications. Originally developed for MIG (GMAW) and TIG (GTAW) welding HY-80 steel for military applications (ships, tanks and submarines), Crown ER 100S-1 is also used... more | go to store |
 | Crown Alloy .035 x 8" ER 330 Stainless Steel MIG 11 lb SPOOL Used to weld 330 wrought alloys and HT cast alloys. Excellent high temperature characteristics make it the first choice for work on heat treat and other type of furnaces. Tensile strength 86,000 PSI Please Note: Welding fumes and gases can be hazardous... more | go to store |
 | Crown Alloy .035 x 8" E 316LT-1FCo Flux-Cored Stainless Steel MIG 11 lb SPOOL Crown E316LT-1 FCo is an all-position gas-shielded flux cored stainless steel electrode for flux cored arc welding (FCAW). The E316LT-1 FCo will produce high quality weldments in all positions of welding. It is used for welding type 316 and 316L... more | go to store |
 | Crown Alloy .035 x 8" SIL-BRONZE Silicon Bronze MIG 10 lb SPOOL Crown Silicon Bronze is a copper-silicon-manganese alloy welding rod used to weld copper, brass and dissimilar combinations. Excellent results when used on galvanized and thin sheet metal using TIG or MIG. Please Note: Welding fumes and gases can be... more | go to store |
 | Crown Alloy .035 x 8" ER 70S-6 Steel MIG 11 lb SPOOL Crown ER70S-6 is a premium mild steel solid wire formulated to provide high quality welds on heavy duty, high speed, spray transfer applications as well as light duty, low speed, short-arc applications. Because of the higher levels of silicon and... more | go to store |
 | Crown Alloy .035 x 8" ER 309L Stainless Steel MIG 10 lb SPOOL Similar usage as the 309, however, the lower carbon content increases resistance to intergranular corrosion and helps to inhibit weld cracking. Tensile strength 87,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here... more | go to store |
 | Crown Alloy .035 x 8" ER 80S-D2 Steel MIG 11 lb SPOOL Crown ER80S-D2 is a premium low-alloy steel solid wire that contains ½ percent molybdenum (for increased strength) and high levels of manganese and silicon to provide good wetting and good rust and scale tolerance. The higher level of deoxidizers (Mn... more | go to store |
 | Crown Alloy .035 x 8" ROYAL 625-30 Iron-Nickel-Chrome MIG 11 lb SPOOL Royal 625-10 (TIG) and Royal 625-30 (MIG) provide high strength welds over a broad temperature range and have exceptional corrosion resistance, including resistance to localized attack such as pitting and crevice corrosion. The aforementioned... more | go to store |
 | Crown Alloy .035 x 8" ER 316L Stainless Steel MIG 10 lb SPOOL Similar usage as E316/ER316, however, the lower carbon content increases resistance to intergranular corrosion and helps to inhibit weld cracking. Tensile strength 82,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click... more | go to store |
 | Crown Alloy .035 x 8" ER 309 Stainless Steel MIG 10 lb SPOOL Used for welding type 309 wrought alloys and CH-20 cast alloys. Also used for welding dissimilar stainless steels and stainless to carbon steel. Tensile strength 90,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click... more | go to store |
 | Crown Alloy .035 x 8" ER 317L Stainless Steel MIG 10 lb SPOOL Used to weld alloys of similar composition. It is utilized in severely corrosive environments where crevice and pitting corrosion are of concern. Tensile strength 75,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click... more | go to store |
 | Crown Alloy .035 x 8" ER 409Nb Stainless Steel MIG 11 lb SPOOL Crown ER 409Nb is a ferritic stainless steel welding wire. The addition of niobium results in a preferential reaction with carbon, which will prevent the chromium from forming carbides. This improves corrosion resistance, increases strength at elevated... more | go to store |
 | Crown Alloy .035 x 8" ER 310 Stainless Steel MIG 10 lb SPOOL Used for welding type 310 and 314 wrought alloys and CK-20 cast alloy. Also used for welding dissimilar stainless steels. Tensile strength 86,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers... more | go to store |
 | Crown Alloy .035 x 8" ROYAL 220-MIG Super Alloy for All Steels MIG 11 lb SPOOL Royal 220-MIG will produce the highest tensile and yield strength on over 50 different kinds of steels. These include Tool Steels, Dies, Springs, Stainless Steel, Carbon Steels, Nickel Clad Steels, Pressure Vessels, Vanadium-Moly Spring Steels and... more | go to store |
 | Crown Alloy .035 x 8" ER 308 Stainless Steel MIG 10 lb SPOOL Used for welding 301, 302, 304, 305, 308 wrought alloys and CF-20 and CF-8 cast alloys. Tensile strength 80,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the... more | go to store |
 | Crown Alloy .035 x 8" ER 308LSI Stainless Steel MIG 13 lb SPOOL Similar usage as the 308L, however the higher silicon content increases wetability and welder appeal. Tensile strength 79,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information.... more | go to store |
 | Crown Alloy .035 x 8" ER 410 Stainless Steel MIG 10 lb SPOOL Crown ER 410 is a martensitic stainless steel welding wire. It is often used for welding or repairing 12% chromium, air-hardenable stainless steels like types 410, 416, 420, 431 and cast C-15. Crown ER 410 is also used for overlays on carbon steels and... more | go to store |
 | Crown Alloy .035 x 8" ROYAL 44-30 Nickel-Iron-Manganese MIG 10 lb SPOOL Royal 44-30 is excellent for making repairs on all ductile and malleable irons. Royal 44-30 is also useful for the welding of other high-strength nodular and gray cast irons where maximum strength and ductility are required. The addition of manganese... more | go to store |
 | Crown Alloy .035 x 8" ALB-30 Aluminum-Bronze MIG 10 lb SPOOL Crown ALB-30 is a versatile and highly alloyed bronze wire used to weld a wide variety of ferrous and nonferrous metals. This alloy is used to join aluminum bronze, high strength copper-zinc alloys, silicon bronze, copper-nickel alloys, manganese... more | go to store |
 | Crown Alloy .035 x 8" ER 316 Stainless Steel MIG 10 lb SPOOL Used for welding 316 wrought alloys and CF-8M cast alloys. Also used on type 304 and 308 alloys when better corrosion resistance than type 308 is needed. Tensile strength 85,000PSI Please Note: Welding fumes and gases can be hazardous to your health.... more | go to store |
 | Crown Alloy .035 x 8" ER 308L Stainless Steel MIG 10 lb SPOOL Similar usage as the 308, however the lower carbon content increases resistance to intergranular corrosion and helps to inhibit weld cracking. Tensile strength 79,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here... more | go to store |
 | Crown Alloy .035 x 8" E 309LT1-FCo Flux-Cored Stainless Steel MIG 8 lb SPOOL Crown E309LT-1 FCo is an all-position gas-shielded flux cored stainless steel electrode for flux cored arc welding (FCAW). The E309LT-1 FCo will produce high quality weldments in all positions of welding. It is used to weld type 309 wrought or cast... more | go to store |
 | Crown Alloy .035 x 8" ER 5356 Aluminum MIG 4 lb SPOOL Second most popular Aluminum Alloy. It can be used on a large variety of aluminums. Will give good color match after anodizing with most base metals. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers... more | go to store |
 | Crown Alloy .035 x 8" ER 1000 Aluminum MIG 4 lb SPOOL 99% pure aluminum used to join high purity aluminums and where a soft weld is wanted. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the manufacturer and Welding Supplies... more | go to store |
 | Crown Alloy .035 x 8" E 71T-GS Flux-Cored Steel MIG 10 lb SPOOL Crown E 71T-GS is a self-shielded flux-cored electrode designed for the semi-automatic and automatic welding of thin-gauge galvanized and carbon steel. It is recommended for single pass welding only in all positions using no shielding gas. Crown E... more | go to store |
 | Crown Alloy .035 x 8" ER 316LSI Stainless Steel MIG 10 lb SPOOL Similar usage as the 316L, however, the higher silicon content increases wetability and welder appeal. Tensile strength 82,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information.... more | go to store |
 | Crown Alloy .035 x 8" ER 309LSI Stainless Steel MIG 10 lb SPOOL Similar usage as 309L, however, the higher silicon content increases wetability and welder appeal. Tensile strength 87,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both... more | go to store |
 | Crown Alloy .035 x 8" ER 4043 Aluminum MIG 4 lb SPOOL Most popular Aluminum Alloy. Easy to use on just about every grade of aluminum. It can not be anodized due to its higher silicon content. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS... more | go to store |
 | Crown Alloy .035 x 8" FH-30 Flame Hardening Tool Steel MIG 11 lb SPOOL Repair and build up of dies, forgings and castings made from medium carbon low alloy steels. Joining 4130 steel when heat treatment or flame hardening is required. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the... more | go to store |
 | Crown Alloy .035 x 8" ROYAL 11-30 High-Nickel MIG 11 lb SPOOL Royal 11-10 (TIG) and Royal 11-30 (MIG) are used to weld wrought and cast forms of commercially pure nickel such as Nickel 200 and Nickel 201 to themselves or each other. The weld metal has good corrosion resistance, particularly in alkalies.... more | go to store |
 | Crown Alloy .035 x 8" ROYAL 82-30 Iron-Nickel-Chrome MIG 11 lb SPOOL Royal 82-10 (TIG) and Royal 82-30 (MIG) are used for high heat and cryogenic (low temperature) applications. This alloy withstands thermal cycling even to sub-zero temperatures thus making it the perfect choice for flame hardening equipment, heat treat... more | go to store |
 | Crown Alloy .035 x 8" ER 312 Stainless Steel MIG 13 lb SPOOL Used for welding cast alloys of similar composition. Best to use when chemistry of base metal is unknown. Tensile strength 115,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS... more | go to store |
 | Crown Alloy .035 x 8" ROYAL C276-30 Nickel-Chromium-Moly MIG 11 lb SPOOL Royal C276-10 (TIG) and Royal C276-30 (MIG) are used primarily to weld Inco alloy C276 and other nickel-chromium-molybdenum alloys. These alloys are found in many pollution control, chemical processing, pulp and paper production, and waste treatment... more | go to store |
 | Crown Alloy .035 x 8" E 308LT-1FCo Flux-Cored Stainless Steel MIG 11 lb SPOOL Crown E308LT-1 FCo is an all-position gas-shielded flux cored stainless steel electrode for flux cored arc welding (FCAW). The E308LT-1 FCo will produce high quality weldments in all positions of welding. It is used for welding types 301, 302, 304,... more | go to store |
 | Crown Alloy .035 x 36" ER 308 Stainless Steel TIG 10 lb BOX Used for welding 301, 302, 304, 305, 308 wrought alloys and CF-20 and CF-8 cast alloys. Tensile strength 80,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the... more | go to store |
 | Crown Alloy .035 x 2# ER 308 Stainless Steel MIG 2 lb SPOOL Used for welding 301, 302, 304, 305, 308 wrought alloys and CF-20 and CF-8 cast alloys. Tensile strength 80,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the... more | go to store |
 | Crown Alloy .035 x 36" ER 308 BR.PKG. Stainless Steel TIG 1 lb TUBE Used for welding 301, 302, 304, 305, 308 wrought alloys and CF-20 and CF-8 cast alloys. Tensile strength 80,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both the... more | go to store |
 | Crown Alloy .035 x 36" CROWN 7 - 10# Steel TIG 10 lb BOX Crown 7 is a premium mild steel solid wire formulated to provide high quality welds on heavy duty, high speed, spray transfer applications as well as light duty, low speed, short-arc applications. Because of the higher levels of silicon and manganese... more | go to store |
Ads related to crown alloy 035 x 8
