Power Tools › Irwin › lincoln 4 1 2 high

IRWIN 44801 Adjustable Spade Bit

Adjustable Spade Drill Bit, 1 3/4 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 1/4 in, Overall Length 5 1/2 in, Bright (Uncoated), Maximum Drilling Depth 4 in more

Irwin 3/4 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin 12 inch straight with 1/2 inch shank carbide tipped masonry drill bit carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal 12 inch length for deep drilling... more

Irwin POWER-GRIP 1/2 in. High Carbon Steel Double-Ended Screw Extractor Set 4 in. 7 pc

The Irwin Tools Hanson 394100 Power-Grip Bit Set i more

Irwin Hanson HAN394100 Power Grip Nut Buster 7-Piece Set

When you are faced with a rounded-off rusted-tight or painted-over bolt bolt extractors will break it free. Includes: 1/4 drive size: 8mm 10mm 11mm 3/16 1/4 5/16 3/8 7/16 and 1/2 . ? Designed for use with power tools ? 1/4 hex shank fits most power... more

Irwin Unibit 1/8 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

Irwin Tools 10231 Unibit 13-Hole High Speed Step Drill 1/8 To 1/2 Each

Irwin 10231 Unibit #1 13-Step 1/4-Inch Step Drill Bit 1/32-inch Steps (1/8- to 1/2- inches) Save time by eliminating the need to change drills when drilling round holes in thin materials. Each smaller size drill also acts as a pilot for the next size.... more

Irwin 10231 Unibit Step Drill Bit ~ #1

UNIBIT #1 STEP DRILLDrills 13 hole sizes1/8 to 1/2 dia. in 1/32 increments1/4 shank1/8 step thicknessSelf-starting tip more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin 1/2 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit Straight Shank 1 pc.

Masonry for use in hammer drills and standard rotary drills. Carbide tipped for maximum wear resistance and capacity to withstand high impact. Slotted tip for faster chip removal. Black oxide coating for extra durability and corrosion resistance.... more

Irwin Unibit 3/16 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

#2 Unibit Self-Starting Stairstep Bit 6-Step 3/16 To 1/2 Dia 3/8 Depth

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

Irwin Hanson HAN90188 High Speed Steel 1/2-Inch Reduced Shank 6-Inch Long 1-3/8-Inch Silver and Deming Drill

High Speed Steel 1/2 Reduced Shank 6 Long 1-3/8 Silver and Deming Drill Bit Features and Benefits: ? Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications ? Three-flatted shank design provides... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin 1/2 in. Dia. High Speed Steel Countersink 1 pc.

IRWIN® Metal Countersinks is made from industrial grade high speed steel for increased durability more

IRWIN INDUSTRIAL Tool 12411 1/2 High Speed Steel Countersink Bit

Precision ground 82-degree tip for countersinking most machineable metals wood or plastic. Made from industrial grade High-Speed Steel for increased durability. Black oxide finish resists corrosion. Five-flute design reduces vibration for smoother... more

IRWIN 88824 - 1-1/2 Speedbor 1/4 Hex Shank Spade Bit

IRWIN 88824 - 1-1/2 Speedbor 1/4 Hex Shank Spade Bit more

Irwin Turbomax 21/64 in. X 4-5/8 in. L High Speed Steel Drill Bit 1 pc

IRWIN Turbomax High Speed Steel Straight Shank Jobber Length Drill Bits features revolutionary tip design stays sharper longer and drills up to 10x faster than other leading drill bits more

Irwin Speedbor 2-1/4 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

IRWIN 3046012 Wood Drilling Bit,Steel,Bit Dia. 2-1/4"

Set, Wood Drilling Bit, Self-Feed, Drill Bit Material Carbon Steel, Drill Bit Size 2 1/4 in, Shank Size 7/16 in, Overall Length 5 in, For Use With Wood, Number of Pieces 1 more

Irwin Tools 87924 Short Spade Bit 1-1/2 4

This IRWIN SPEEDBOR Short-Length Spade Drill Bit fits into confined spaces where standard lengths will not fit. The double-cutting spurs scribe the outside of the hole to help reduce breakout and the large shank design helps keep the bit durable. With... more

Irwin Tools 61132 Tungsten Carbide Masonry Drill Bit 1/2 x 4

1/2-1/4 HANSON FST SP MS Irwin Hanson 611 Series Carbide-Tipped Economy Rotary Masonry Drill Bits WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California... more

Irwin Tools 3046008 Speedbor Max Self Feed Wood Drill Bit 1-1/2 Each

Ideal for pipe & conduit systems. 3 times the cutting area & edges of standard self feed bits. For drilling large diameter holes in wood aggressive screw pitch. Precision milled shank eliminates run out & wobble. Forged in 1 piece from high carbon... more

Hanson HSDR12A/CD 1/4

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance For general use in wood metal and... more

DRS&D1/2SK1 1/2

Drill Bit High Speed Steel 1/2 Reduced Shank 6 Long 1-1/2 in Tube more

Irwin 3041001 Speedbor Max Wood Boring Bit 1/2 x6

Cutting spurs have 3 cutting edges for added durability. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4 quick change chucks. more

Irwin Tools 3041001 Speedbor Max Speed Standard Length Drill Bit 1/2 x 6 Each

Tri-flute design for faster chip ejection. Cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4 quick change chucks.... more

IRWIN 3041001 Woodboring Bit, 1/2 x 6 IN

Speedbor, Hybrid Drill Bit, 1/2 in, 1 3/4 in Flute Length, 6 in Overall Length, Shank Diameter 1/4 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

Hanson HSDR12A/CD 1/2

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for best combination of strength heat resistance and wear resistance For general use in wood metal and plastic... more

Irwin 373004 Hex Hole Saw Mandrel 1/2

The Irwin is a hex shank designed to fit holesaws with diameters ranging from 1-1/4 inches to 6 inches. The shank has a diameter of 1/2 inch and features a hex shape for easy installation and removal.Specifications Shank Diam: 1/2 in. Shank Type:... more

Hanson BIT DRI 1/16 TURBOMAX CARDED 2 PCK

Features and Benefits: Self centering tip for clean fast starts Jet Point® tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute... more

Irwin Turbomax Multi Size Dia. x Multiple L High Speed Steel Drill Bit Set Straight Shank 15 pc.

Turbo point for no slip starting on hard materials prevents walking of drill bit. Gold oxide coating for additional corrosion resistance. Can be used for drilling in metal wood or plastic. Jobber length. Set includes: (2) 1/16 5/64 (2) 3/32 7/64 (2)... more

Irwin 49907 Power Drill Auger Bit 7/16

#I-100 7/16 Solid Center Auger Bit 4-1/2 Twist Length 7-1/2 Overall Length Provides Extra Rigidity While Boring Wide Lands Keep The Bit Straight As It Bores Through The Hole The Flutes Are Ground Behind The Lands To Funnel The Chips To The Inside Of... more

Irwin Industrial Tools 49906 I-100 3/8-Inch Auger Bit

#I-100 3/8 Solid Center Auger Bit 4-1/2 Twist Length 7-1/2 Overall Length Provides Extra Rigidity While Boring Wide Lands Keep The Bit Straight As It Bores Through The Hole The Flutes Are Ground Behind The Lands To Funnel The Chips To The Inside Of The... more

Hanson 8PC S&D DR-8-PC SET

Features and Benefits: 8-piece 1/2 reduced shank silver & deming high speed steel drill bit set Constructed of M-7 high speed steel for high resistance to abrasion Three flatted shank design provides better chuck grip while reducing slippage Ideal for... more

Hanson HS DR CD 3/8

Features and Benefits: Constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance Standard 118 degree point for use in wood metal and plastic Overall length: 3-1/8 more