You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame | Prime-Line Diecast, Keyed... ... more | go to store |
This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This stainless steel housing and... ... more | go to store |
Replace or repair broken or missing sliding door rollers with the Prime-Line B 701 Sliding Door Wheels. This adjustable tandem patio door rollers replacement is used by a variety of patio door manufacturers. Made of plastic housing and ball bearing... ... more | go to store |
This Keyed Deadbolt Lock by Prime-Line Products is a flush mounted, spring-loaded deadbolt lock that is easy to install with only a few simple tools. It is key locked from the inside, and it comes with three different keepers, which offers flexible... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller... ... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a very popular sliding... ... more | go to store |
This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This shower door handle set is constructed of diecast materials and comes in a chrome-plated finish. It features a 2-1/4 in. hole center spacing, fasteners are included, and it can be used on both sliding and swinging shower door systems. The design of... ... more | go to store |
Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This white plastic inside handle (or pull) fits the Andersen, Frenchwood, Narroline or Perma-Shield doors manufactured from 1982 to present. The... ... more | go to store |
This sliding screen door roller is as common roller replacement for many sliding screen doors. It is a high density polyethylene ball bearing roller with a center groove. It is 1 inch in diameter and 1/4 inch thick with a 3/16 inch axle hole. Order... ... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This aluminum housing with... ... more | go to store |
This is a 7/8 inch tub and shower door nylon ball bearing roller with an oval-edged wheel. It has a threaded hex head hub that uses an 8-32 x 3/8 inch long Phillips binder head machine screw to fasten it to the door bracket. Used on many different tub... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
This is a plain back tandem roller assembly with two 1 in. concave ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is 11/16 in. wide, 1-1/32 in. tall... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall with a 13/16 in. flare. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This drawer track delta guide is constructed from white polyethylene. It features a large bearing area for heavily loaded drawers. This type of guide has a 6-point contact that reduces lateral movement of the drawer. | Prime-Line Steel Drawer Track... ... more | go to store |
Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... ... more | go to store |
This is a U-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller in a stamped steel "U" back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting... ... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball-bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's... ... more | go to store |
This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together,... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... ... more | go to store |
This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow... ... more | go to store |
This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow... ... more | go to store |
Ads related to Prime-Line 1-1/2 in. Ball Bearing Sliding Door Roller Assembly Single Pack 6.35 H x 3.75 W x 0.8 D in Unfinished Plastic | Wayfair D 1737